Canada Print On Canvas, Custom Made Wood/Metal Frames, Block Mounting & Handmade Oil Paintings
   Toll Free: 1-888-533-6278 (KeenART)      Deals  
  My Account     My Uploads     My Cart  

 Products & Pricing -> Face Mounting Prints On Acrylic/PlexiGlass

 Canada Face Mounting Prints On Acrylic/PlexiGlass:
If you're looking for a contemporary way to display your favorite photograph or fine art print without the distraction or additional cost of a frame, then plexi face mounting is a method to consider. When your beautiful Giclée paper print is enclosed between a sheet of high quality acrylic glass and an aluminium Di Bond panel, the result is an uninterrupted, vividly modern display that highlights both the image and your wall.

Facemount creates a permanent bond directly between the image and the back of the plexi. Reflection between the image and glazing is eliminated, causing light to reflect differently than it would in a traditionally framed image. Colours are more vibrant and the image appears sharper than ever before, standing out with a near 3D effect. The adhesive Facemount film contains UV stabilizers so the glue won't yellow and colours will remain vivid for years to come.

    * Printing on RC Gloss paper
    * Facemounting on 3mm Acrylic/Plexi
    * Mounting plexi on aluminum e-panel/Dibond
    * Routered edges
    * C-Bar hanging system

Please use our online form on right panel to calculate the pricing of a Face Mount on Plexi. If you upload your image(s) online, you will see the available print sizes and the pricing for each size. Please note the maximum print size available is 94" by 42".

To learn more about Plexi Face Mount product read this article: PLEXI FACE MOUNTS

To place an order for a plaxi face mount, upload your image(s) online and continue from there: UPLOAD

Face Mount Price Calculator:
Choose Size:

Volume discount rates, Same Product*:
Qty 2-5 6-10 11-50 51-100
Discount 5% 10% 15% 20%
* Volume discount rates cannot be combined with other offers.
* Same Product: ordering multiple qty of the same photo with the same width, height & style.
Canada Face Mounting Prints On PlexiGlass
The layers of a plexi face mount.
Small 9x12 inch Plexi Face Mount
Small 9x12" Plexi Face Mount
PLEXI FACE MOUNTS EDGES

Plexi Face Mount Edges
Face Mount Edges, Close-up

Plexi Face Mount Edges, Close-up
ACRYLIC FACE MOUNT
Light Reflections
ACRYLIC FACE MOUNT
30x20" Face Mount & Vibrant colors
PLEXI FACE MOUNT C-BAR BACKING

C-Bar Hanging System for a 9x12" Face Mount
PLEXI FACE MOUNT C-Bar Hanging System

C-Bar Hanging System for a 30x20" Face Mount

1. Fine Art print on Metallic or Glossy paper 2. Print is sandwiched between Acrylic and Dibond Aluminum Composite 3. Final product With base frame at the back Reay to hang

 Face Mounting Prints On Acrylic - FAQs:

Q1 : What is a plexi face mount?
Q2 : What kind of print can I get in a plexi face mount?
Q3 : Is plexi face mounting an archival option?
Q4 : What are the benefits of choosing plexi face mounting?
Q5 : How is my plexi face mount made?
Q6 : How do I clean my plexi face mount?
Q7 : Can I send you my print to be mounted?
Q8 : How long will my plexi face mount order take?
Q9 : How heavey is a plexi face mount?
 

Q1 : What is a plexi face mount?
A plexi face mount is a frameless way to display your printed images. A metallic or glossy print is sandwiched between a sheet of aluminium di-bond and a sheet of crystal clear plexiglass. The three pieces are fused together using a cold press.

Your image will have enhanced color and a three dimensional appearance due to the plexiglass being affixed directly to the print. The plexi face mount is hung with an "invisible" hanger that gives the appearance your print is floating off the wall.

For more information, read our in-depth article on Plexi Face Mounting.

Q2 : What kind of print can I get in a plexi face mount?
Any image you choose can be transformed into a beautiful, frameless plexi face mount. Photographs are the most popular choice, but you can get great results from a vibrant abstract painting or other artwork, too.

You can choose between metallic and glossy paper for your print.

Q3 : Is plexi face mounting an archival option?
No. Because the plexiglass and aluminium backing cannot be removed without damaging the print, plexi face mounting is not an archival or conservation display option. However, your image is printed using archival Gicl&ecute;e inks and top quality papers, and the plexiglass is UV-resistant.

Q4 : What are the benefits of choosing plexi face mounting?
There are many reasons to choose a plexi face mount instead of a regular framed print.

  • By attaching the plexiglass directly to the print, a sense of depth is achieved, resulting in an almost 3D effect. Reflection may be diminished compared to a regular framed image.

  • Sometimes the glass over prints can dull the image. With a face mount, the combination of the glossy or metallic paper and the high shine plexiglass results in vivid, rich color every time.

  • Your face mount is created using the same top of the line inks, papers, and plexiglass used in custom framing. This means your image is equal to a framed print in longevity and quality.

  • A plexi face mount is a bit less expensive than a framed print of the same size. The cost of the frame moulding, custom construction, and matting is avoided.

  • If your face mount happens to topple off the wall, there is a good chance it will remain undamaged. There is no frame to crack or break, and the plexiglass is unlikely to chip due to the reinforced backing.

  • Unlike the foam core backing on a framed print, the aluminium Di Bond protects your print from the back just as much as from the front.

  • Once your image is mounted onto the plexiglass, there is no chance of moisture, dust, or other problematic particles working their way between the clear cover and your print - the image will remain just as uninterrupted and clear as the day it was delivered.


Q5 : How is my plexi face mount made?
  1. First a sheet of plexiglass and a sheet of aluminium are cut to fit your print

  2. A piece of transparent mounting tissue is placed between the print and the aluminium backing. This "sandwich" passes through the cold press, which forms an adhesive bond. (Sometimes the aluminium will have an adhesive attached, which eliminates the need for the tissue.)

  3. The same process is followed to affix the plexiglass to the front of the print.

  4. Once the pieces are fused together, a custom size, heavy-duty hanging system is attached to the aluminium backing. This rectangular frame sits in from the edges of the face mount, creating a "floating" effect. The plexi face mount is hung on the wall using only a nail or two.

    Q6 : How do I clean my plexi face mount?
    Your plexi face mount can be cleaned with a soft cloth and water. Do not use window/glass cleaner. Ensure the cloth is free of debris that might scratch the plexiglass. If you feel you need more than water, cleaners especially for acrylic glass can be found online and in certain stores.

    Q7 : Can I send you my print to be mounted?
    No. We prefer to print your image ourselves as this ensures compatibility throughout the whole process.

    Q8 : How long will my plexi face mount order take?
    The production time for your plexi face mount is 5 - 7 business days. Depending on where you live, shipping can take anywhere from one to 7 days longer.

    Q9 : How heavey is a plexi face mount?
    Roughly 2Ib/Sqft, for example a 36x24 inch Face mount will be roughly 12Ib.
If you don't find the answer you're looking for here, please contact us.
 
Quick Info
Home
Contact us
My Account
About us
Sitemap
Social Media
Blog
Twitter
FaceBook
Instagram
TikTok
Legal
Terms & Conditions
Privacy Policy
Help
FAQs / all
Resources
How it works?
Canvas Edge Options
Order Problems?
Order
Pro Account
Discounts / Newsletter
Payment Methods
Testimonials
Shipping

 Paypal
 Visa
 MasterCard
American Express
Canada Giclee On Canvas, Fine Art Printing - Art Scanning & Reproductions - Handmade Oil Paintings - Custom Wood Panels, Metal Picture Framing - Block/Plaque Mountings, Large Format Dry Mounting & Lamination - Art Supplies: Stretcher Bars, Cradled Wood Panels and Artist Canvas - Collages On Canvas - Plexi/Acrylic Face Mounts - Block Acrylics, Fabric Printing, Dye Sublimation - Cityscape Skyline Prints, Resin, Photo Gifts and more...

Vancouver Canvas Prints - Toronto Photos On Canvas - Calgary Photos On Canvas - Canada Laser Engraving & Cutting Services



© 2002-2024 - KeenART Media Ltd.